| Customization: | Available |
|---|---|
| Product Name: | Single Row Tapered Roller Bearing |
| Keywords: | Roller Bearing |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The design advantages of tapered roller bearings are as follows. Firstly, they can handle both radial and axial loads, providing a more comprehensive load-bearing capacity. Secondly, the tapered rollers in the bearing allow for better distribution of the load, reducing stress on individual components and increasing the bearing's durability.
Additionally, the design of tapered roller bearings enables them to operate at higher speeds with reduced friction and heat generation, improving the overall efficiency of the system. Finally, their compact design makes them suitable for a wide range of applications, especially in situations where space is limited.
| Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
| dynamic | static | Reference speed | Limiting speed | ||||
| d[mm] | D[mm] | T[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
| A 4059/A 4138 | 14.989 | 34.988 | 10.998 | 16.5 | 13.2 | 17 000 | 22 000 |
| 30202 | 15 | 35 | 11.75 | 18.5 | 14.6 | 17 000 | 20 000 |
| 30302 | 15 | 42 | 14.25 | 27.7 | 20 | 15 000 | 18 000 |
| 11590/11520 | 15.875 | 42.862 | 14.288 | 21.5 | 17.6 | 13 000 | 17 000 |
| 30203 | 17 | 40 | 13.25 | 23.4 | 18.6 | 15 000 | 18 000 |
| 30303 | 17 | 47 | 15.25 | 34.2 | 25 | 13 000 | 16 000 |
| 32303 | 17 | 47 | 20.25 | 42.8 | 33.5 | 12 000 | 16 000 |
| LM 11949/910 | 19.05 | 45.237 | 15.494 | 33.8 | 27.5 | 13 000 | 16 000 |
| 30204 | 20 | 47 | 15.25 | 34.1 | 28 | 12 000 | 15 000 |
| 30304 | 20 | 52 | 16.25 | 41.9 | 32.5 | 12 000 | 14 000 |
| 32004 X | 20 | 42 | 15 | 29.7 | 27 | 13 000 | 16 000 |
| 32304 | 20 | 52 | 22.25 | 54.3 | 45.5 | 11 000 | 14 000 |
| M 12649/610 | 21.43 | 50.005 | 17.526 | 45.4 | 38 | 12 000 | 15 000 |
| 320/22 X | 22 | 44 | 15 | 30.9 | 29 | 13 000 | 15 000 |
| 30205 | 25 | 52 | 16.25 | 38.1 | 33.5 | 11 000 | 13 000 |
| 30305 | 25 | 62 | 18.25 | 55.3 | 43 | 9 500 | 12 000 |
| 31305 | 25 | 62 | 18.25 | 46.6 | 40 | 8 500 | 11 000 |
| 32005 X | 25 | 47 | 15 | 33.2 | 32.5 | 12 000 | 14 000 |
| 32205 B | 25 | 52 | 19.25 | 44.5 | 44 | 10 000 | 13 000 |
| 32305 | 25 | 62 | 25.25 | 74.1 | 63 | 9 000 | 12 000 |
| 33205 | 25 | 52 | 22 | 57.9 | 56 | 10 000 | 13 000 |
| 15578/15520 | 25.4 | 57.15 | 17.462 | 49.1 | 45.5 | 10 000 | 12 000 |
| 302/28 | 28 | 58 | 17.25 | 46.6 | 41.5 | 10 000 | 12 000 |
| 320/28 X | 28 | 52 | 16 | 39 | 38 | 10 000 | 13 000 |
| 322/28 B | 28 | 58 | 20.25 | 51.9 | 50 | 9 500 | 12 000 |
| 1988/1922 | 28.575 | 57.15 | 19.845 | 58.2 | 55 | 10 000 | 12 000 |
| 30206 | 30 | 62 | 17.25 | 50 | 44 | 9 000 | 11 000 |
| 30306 | 30 | 72 | 20.75 | 69.2 | 56 | 8 000 | 10 000 |
| 31306 | 30 | 72 | 20.75 | 58.3 | 50 | 7 500 | 9 500 |
| 32006 X | 30 | 55 | 17 | 43.9 | 44 | 10 000 | 12 000 |
Cleaning:
Thoroughly clean the shaft, housing, and mating surfaces using lint-free cloths to remove contaminants such as dust, oil, or burrs.
Inspection:
Verify the dimensional tolerances of the shaft and housing to ensure compatibility with the bearing's inner and outer rings (interference fit recommended for the inner ring, transition fit for the outer ring).
Tool Preparation:
Prepare necessary tools, including hydraulic nuts, induction heaters (heating temperature ≤120°C), torque wrenches, and dial indicators for clearance measurement.
Press-Fit Method:
Align the inner ring (cone) with the shaft shoulder, ensuring no tilting occurs.
Apply uniform pressure on the inner ring using a press or hydraulic tool. Avoid applying force directly to the outer ring (cup) or rollers.
After installation, check for smooth rotation and ensure there is no abnormal noise or binding.
Thermal Mounting:
Heat the inner ring to 80-120°C using an induction heater or oil bath (open flame heating is strictly prohibited).
Quickly mount the heated inner ring onto the shaft and allow it to cool naturally.
Tapered Shaft Mounting:
For tapered shafts, use a lock nut (e.g., KM-type nut) to axially press the inner ring against the shaft shoulder.
Tighten the lock nut to the manufacturer-specified torque value and secure it with a locking device (e.g., tab washer).
Tapered roller bearings require proper axial clearance or preload adjustment to ensure optimal performance.
Measure the axial clearance using a dial indicator. Adjust the lock nut to achieve the recommended clearance (typically 0.02-0.05mm for standard applications).
For preloaded applications, follow the manufacturer's specifications to achieve the desired preload value.
Apply a high-quality lubricant (grease or oil) suitable for the operating conditions.
Fill 30-50% of the bearing's free space with grease for standard applications. For high-speed or high-temperature conditions, consider oil lubrication or oil-mist systems.
Ensure the lubricant is compatible with the bearing material and operating environment.
Inspect and install appropriate seals (contact or non-contact type) to prevent contamination.
Ensure the sealing lip is oriented toward the contamination source.
Perform a no-load test run after installation to verify proper operation. Monitor temperature rise (ΔT ≤40°C) and vibration levels (≤ISO 10816 standards).
Never strike the bearing rings or rollers directly with a hammer or other tools.
Avoid overheating the bearing during thermal mounting (maximum temperature: 120°C).
Do not mix incompatible lubricants or use contaminated grease.
Q1: What about the MOQ? Can you accept a sample order?
A: Our company MOQ is 1pc, and we can accept sample orders.
Q2: Can you accept OEM/ODM?
A: Yes, we can.Customizing according to your requirements or drawing.
Q3: Do you supply door-to-door service?
A: By air or express(DHL, FEDEX, EMS, etc.)
Q4: Could you tell me the materials of your bearings?
A: Chrome steel, carbon steel, stainless steel, ceramic, and plastic material.
Q5: Are you a factory or trading company?
A: We have our factory, JUDONG Bearing is specializes in manufacturing and exporting bearings.
){kind=link}