Tapered Roller Bearings with a Complete Range of Models 32236/Df 32936/Dfc200 32940/Df 32048 X/Df

• Customization: Available
• Product Name: Single Row Tapered Roller Bearing
• Keywords: Roller Bearing
• Model NO.: 32236/DF 32936/DFC200 32940/DF 32048 X/DF
• Bore Diameter: 35 mm
• Outside Diameter: 62 mm
• Width, Total: 18 mm
• Basic Dynamic Load Rating: 42.9 kN
• Basic Static Load Rating: 54 kN
• Reference Speed: 8 000 R/Min
• Limiting Speed: 10 000 R/Min
• Product Net Weight: 0.224 Kg
• Transport Package: Standard Packaging or Customized
• Specification: Standard specifications or customized
• Trademark: JD Bearing
• Origin: China
• HS Code: 8482102000
• Production Capacity: 200000

Product Description

Product Description

    Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation.
    The inner ring, with rollers and cage, can be mounted separately from the outer ring.
    These separable and interchangeable components facilitate mounting, dismounting and maintenance.
    By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

    The design advantages of tapered roller bearings are as follows. Firstly, they can handle both radial and axial loads, providing a more comprehensive load-bearing capacity. Secondly, the tapered rollers in the bearing allow for better distribution of the load, reducing stress on individual components and increasing the bearing's durability.
    Additionally, the design of tapered roller bearings enables them to operate at higher speeds with reduced friction and heat generation, improving the overall efficiency of the system. Finally, their compact design makes them suitable for a wide range of applications, especially in situations where space is limited.

Detailed Photos

 

Product Parameters

 

	d[mm]	D[mm]	T[mm]	C[kN]	C0[kN]	[r/min]	[r/min]
32236/DF	180	320	182	1 833	3 250	1 100	1 900
32236/DFC410	180	320	182	1 833	3 250	1 100	1 900
32236/L4BDFC440	180	320	182	1 833	3 250	1 100	1 900
32936/DF	180	250	90	746	1 460	1 500	2 200
32936/DFC200	180	250	90	746	1 460	1 500	2 200
30238/DFC700	190	340	120	1 308	2 000	1 100	1 800
32038 X/DF	190	290	128	1 381	2 400	1 300	2 000
32038 X/DFC610	190	290	128	1 381	2 400	1 300	2 000
32938/DF	190	260	90	760	1 530	1 400	2 200
32040 X/DF	200	310	140	1 372	2 750	1 100	1 900
32040 X/DFC230	200	310	140	1 280	2 750	1 100	1 900
32040 X/DFC420	200	310	140	1 372	2 750	1 100	1 900
32240/DF	200	360	208	2 229	4 000	1 000	1 700
32240/DFC430	200	360	208	2 229	4 000	1 000	1 700
32240/DFC500	200	360	208	2 229	4 000	1 000	1 700
32940/DF	200	280	102	1 008	1 900	1 400	2 000
32940/DFC680	200	280	102	1 008	1 900	1 400	2 000
32044 X/DF	220	340	152	1 637	3 350	1 000	1 700
32044 X/DFC190	220	340	152	1 637	3 350	1 000	1 700
32044 X/DFC720	220	340	152	1 637	3 350	1 000	1 700
32044 X/L4BDFC480	220	340	152	1 540	3 350	1 000	1 700
32244/DF	220	400	228	2 949	5 400	900	1 500
32244/DFC460	220	400	228	2 949	5 400	900	1 500
32244/DFC480	220	400	228	2 949	5 400	900	1 500
32244/DFC520	220	400	228	2 949	5 400	900	1 500
32244/DFC560	220	400	228	2 949	5 400	900	1 500
32944/DF	220	300	102	1 030	2 000	1 200	1 900
32944/DFC300	220	300	102	1 030	2 000	1 200	1 900
32048 X/DF	240	360	152	1 695	3 550	950	1 600
32048 X/DFC205	240	360	152	1 695	3 550	950	1 600

 
   

Certifications

Packaging & Shipping

Installation Instructions

Installation Guide for Tapered Roller Bearings


1. Pre-Installation Preparation

• Cleaning:
  Thoroughly clean the shaft, housing, and mating surfaces using lint-free cloths to remove contaminants such as dust, oil, or burrs.

• Inspection:
  Verify the dimensional tolerances of the shaft and housing to ensure compatibility with the bearing's inner and outer rings (interference fit recommended for the inner ring, transition fit for the outer ring).

• Tool Preparation:
  Prepare necessary tools, including hydraulic nuts, induction heaters (heating temperature ≤120°C), torque wrenches, and dial indicators for clearance measurement.

2. Installation Methods

• Press-Fit Method:

  1. Align the inner ring (cone) with the shaft shoulder, ensuring no tilting occurs.

  2. Apply uniform pressure on the inner ring using a press or hydraulic tool. Avoid applying force directly to the outer ring (cup) or rollers.

  3. After installation, check for smooth rotation and ensure there is no abnormal noise or binding.

• Thermal Mounting:

  1. Heat the inner ring to 80-120°C using an induction heater or oil bath (open flame heating is strictly prohibited).

  2. Quickly mount the heated inner ring onto the shaft and allow it to cool naturally.

• Tapered Shaft Mounting:

  1. For tapered shafts, use a lock nut (e.g., KM-type nut) to axially press the inner ring against the shaft shoulder.

  2. Tighten the lock nut to the manufacturer-specified torque value and secure it with a locking device (e.g., tab washer).

3. Clearance Adjustment

• Tapered roller bearings require proper axial clearance or preload adjustment to ensure optimal performance.

• Measure the axial clearance using a dial indicator. Adjust the lock nut to achieve the recommended clearance (typically 0.02-0.05mm for standard applications).

• For preloaded applications, follow the manufacturer's specifications to achieve the desired preload value.

4. Lubrication

• Apply a high-quality lubricant (grease or oil) suitable for the operating conditions.

• Fill 30-50% of the bearing's free space with grease for standard applications. For high-speed or high-temperature conditions, consider oil lubrication or oil-mist systems.

• Ensure the lubricant is compatible with the bearing material and operating environment.

5. Sealing and Protection

• Inspect and install appropriate seals (contact or non-contact type) to prevent contamination.

• Ensure the sealing lip is oriented toward the contamination source.

• Perform a no-load test run after installation to verify proper operation. Monitor temperature rise (ΔT ≤40°C) and vibration levels (≤ISO 10816 standards).

6. Prohibited Actions

• Never strike the bearing rings or rollers directly with a hammer or other tools.

• Avoid overheating the bearing during thermal mounting (maximum temperature: 120°C).

• Do not mix incompatible lubricants or use contaminated grease.

Company Profile

FAQ

Q1: What about the MOQ? Can you accept a sample order?
A: Our company MOQ is 1pc, and we can accept sample orders.

Q2: Can you accept OEM/ODM?
A: Yes, we can.Customizing according to your requirements or drawing.

Q3: Do you supply door-to-door service?
A: By air or express(DHL, FEDEX, EMS, etc.)

Q4: Could you tell me the materials of your bearings?
A: Chrome steel, carbon steel, stainless steel, ceramic, and plastic material.

Q5: Are you a factory or trading company?
A: We have our factory, JUDONG Bearing is specializes in manufacturing and exporting bearings.